The EasyH2O Reverse Osmosis water filter system will turn your standard quality tap water into pure, clear, fresh great tasting water, free from any unwanted contaminants.
The pumped System not only creates a faster refil of the holding tank but will also provide a better filtration
What will it do to my water?
The reverse osmosis system with its 5 stages of filtration will remove the following unwanted contaminants from your water (%): Sodium 99 Calcium 99 Magnesium99 Potassium 98 Iron 99 Manganese99 Aluminium 99 Ammonium97 Copper 99 Nickel 99 Zinc 99 Strontitan 99 Cadmium 99 Silver 98 Mercury 98 Barium 99 Chromium 99 Lead 99 Chloride 99 Bicarbonate98 Nitrate 97 Fluoride 98 Silicate 98 Phosphate 99 Chromate 99 Cyanide 95 Sulphate 99 Thiosulfate 99 Ferro cyanide97 Bromide 98 Borate 50 Arsenic 99 Selenium 99 Bacteria 99 Protozoa 99 Amoebic Cysts99 Giardia 99 Asbestos 99 Sediment/Turbidity99 Perfluorooctane Sulphonate (PFOS) 99
It will not put anything IN to your water.
How does it work?
Your water will be diverted from your cold water pipe wherever you situate the RO system into a series of 4 filters and a membrane. It will then pass through a 15L pressurized tank and be dispersed thorough a separate tap by your sink.
The five stages of RO filtration are as follows.
The first filter is a 5 micron polypropylene filter which removes and sediments/ metals and above 5 micron.
The second is a carbon filter which will remove chlorine, pesticides, herbicides, lead, aluminium, hormones, taste and odour from your water.
Filter number three is a 1 micron polypropylene filter which will remove all remaining sediments/ metals and particles above 1 micron.
The fourth stage of filtration is the finest part of the filtration process. The water is forced through the membrane and separated into pure and un-pure water. The un-pure water,approx 70%, is sent to waste and the pure water moves on to the final stage of the process…. ..a final carbon filter. This filter adds the finishing touch to your water making it crystal clear.
How big is it?
The dimensions of the filter unit are:
480 mm height
350 mm width
175 mm depth
The dimensions of the 15 L tank are: 350 mm height 275 mm width 275 mm depth
The pump on this unit is advised if fitting the unit to a low pressure systems, ie water pressure less than 1 Bar or 14PSI. The water needs to be under at least 1 Bar in order to get through the RO membrane and fill the tank up. You can still use the pumped version if the pressure is higher than 1 Bar,this will just increase the pressure and fill the tank up at a faster rate. Also the higher the pressure the better the filtration will be through the Membrane.
Flow rate 0.1317 GPM / 1.2 LPM 24VDC
Outlet pressure 125PSI / 8.62Bar Maximum
Like all of the EasyH2O products, this system is a basic DIY job, it requires no plumbing. Comes complete with water filter tap, easy to use self-piercing valve, and all fittings necessary to immediate installation. Full instructions provided. Complete filter replacements from £30